This webinar is intended for engineers who design RF components and systems using tools for simulation and hardware test. We will be introducing a new joint solution approach, developed in cooperation with Cadence. The R&S®VSESIM-VSS solution is enhancing the capabilities of the Cadence® Visual System Simulator™...
Published: Dec 17, 2021
This webinar is intended for engineers who work on high-speed digital design and test. In particular, we will be focusing at USB interfaces.
After a quick introduction into USB technology we will be discussing the details of USB 2.0 and 3.2 compliance testing. The webinar will enable you to learn common signal integrity...
Published: Dec 17, 2021
Test engineers spend as much as 50 percent of their time (or even more in some cases) actively dealing with obsolescence in their test program sets.
Read about different solutions in the marketplace to help you overcome the challenges you face today.
Also explore best practices...
Published: Mar 03, 2021
A VCXO is a crystal oscillator where its output frequency changes in direct proportion to the application of an input control voltage. There are many names given or assigned to this output frequency being changed with the control voltage, which can be confusing.
Absolute Pulling Range (APR) has become a very...
Published: Jul 25, 2018
Today, R&D engineers face challenging time-to-market goals. Extending the product development schedule and delaying the product launch can prove to be extremely costly in terms of opportunity cost and lost market share. Nearly 50% of products fail EMC compliance the first time.
Every day spent on debugging, isolating...
Published: Jun 04, 2020
This application note created by the Test and measurement specialist Rohde & Schwarz and the University of New Hampshire Interoperability Laboratory (UNH-IOL) describes methods of implementation (MOI) for precise, fast and error-free compliance testing of high-speed cables and backplanes according to InfiniBand standards...
Published: Apr 20, 2021
This webinar explores the topic of debugging CAN bus interfaces by using an oscilloscope. We will be talking about topics such as sources of bus errors, EMI debug correlation with protocol decode, boot cycle testing, application specific triggering, eye measurements and more.
Attendees of the webinar will gain insightful...
Published: Aug 23, 2021
Most organizations do not consider production test a top priority, but it is a necessity to prevent major quality issues in the products that represent the company brand in the hands of customers.The costs, however, can be significant and are often greatly misunderstood, especially when there’s no...
Published: Apr 01, 2021
The demands for faster wireless access and lower latency are continuously increasing. To meet these demands and to drive new use cases, regulatory bodies around the world open up spectrum in the 6 GHz band for unlicensed use. This new spectrum allows the Wi-Fi 6 standard, IEEE 802.11ax, to unfold its full power. It will...
Published: Aug 25, 2021
Modern vehicles can contain over 100 ECUs controlling everything from the drivetrain to the ADAS systems. Each ECU needs to be tested individually as well as in conjunction with other components.
This white paper discusses the five main tester design challenges and five common approaches to ECU production test to...
Published: Nov 04, 2019
Feed-forward headsets typically are more easily developed because the design engineer usually does not have to deal with stability issues. A major drawback of this topology, however, is wind noise, since the ANC microphones are directly exposed to the ambient. An alternative that overcomes this drawback is the use of a...
Published: Nov 01, 2018
ECUs became a standard component in most vehicles. As a computer designed to solve a very specific problem, the ECU is a fundamental component in an automobile. Modern vehicles can contain over 100 ECUs with many different purposes.
This white paper explores different approaches to test automotive electronic control...
Published: Apr 01, 2021
Safety, availability, and cost considerations can make performing thorough tests of embedded control devices using the complete system impractical. Hardware-in-the-loop (HIL) simulation is a real-time test technique used to test these devices more efficiently. During HIL test, the physical system that interfaces...
Published: Apr 01, 2021
Rail voltages are getting smaller, and tolerances are decreasing. As a result, making accurate power rail measurements has become much more difficult.
Industry dynamics are driving both a decrease in rail voltage values as well as tighter tolerances across a wide range of rails. Making an accurate ripple measurement...
Published: Jun 04, 2020
